How we decide a replacement is the right call
A heater that leaks from the tank body cannot be repaired, and one that is over a decade old with repeat failures is usually past its useful life. We look at the tank age on the label, the leak location, the venting and the supply lines before we recommend anything.
If a repair makes more sense, we say so. Our water heater repair page explains which problems are worth fixing.
Standard tank, tankless or hybrid: how they compare
Most failed tanks are replaced with the same type, but the choice is worth a minute.
| Type | Upfront cost | Running cost | Notes |
|---|---|---|---|
| Standard gas tank | Moderate | Moderate | Needs a proper flue and a gas line in good shape |
| Standard electric tank | Lower | Higher in many homes | Simple install, needs the right breaker and wiring |
| Tankless | Higher | Lower per gallon | Gas versions may need a bigger gas line, see tankless options |
| Hybrid heat pump | Highest | Lowest | Needs open space and a condensate drain |
Tank failed? Do not wait.
A replacement quote and an arrival window are one call away, any hour.
Sizing the new heater for your household
Tank size follows how many people shower and how many fixtures run at once. A couple in a small house may do well with 40 gallons. A family of four with a soaking tub often needs 50 or more.
Bigger is not always better. A tank larger than your demand wastes energy keeping extra water hot, and it may not fit the space or the existing venting.
What the replacement visit includes
Every job follows the same safety steps, whatever the brand.
- Shutting off water, power or gas and draining the old tank.
- Disconnecting and hauling away the old heater.
- Setting the new unit and connecting new flex lines where needed.
- Checking the relief valve, discharge line and expansion tank.
- Testing for leaks, temperature and, on gas units, draft and flame.
- Explaining the settings and the date to flush the tank next.
Tank failure: what to do in the first ten minutes
Limit the damage
A tank that has split can release forty or fifty gallons across a floor. Speed matters most in the first few minutes.
- Close the cold water shutoff on the pipe above the heater.
- Switch off the breaker or turn the gas control to off.
- Move anything valuable off the floor and use towels to direct water to a drain.
- Open the lowest hose bib or drain valve if it is safe to reach.
- Call the 24/7 line and tell us the tank size and fuel type.
If water has soaked drywall or flooring, photograph it before cleanup and contact your insurer as soon as practical.
Permits, licensing and doing it right
Residential plumbing work above 500 dollars in South Carolina requires a license under the state's Residential Builders Commission. You can verify a plumber's license on the South Carolina Labor, Licensing and Regulation lookup tool before you let anyone start.
Permit rules vary, so ask the City of Easley building department whether your replacement needs one. We will tell you what we know about your address.
Replacement options compared
Each option has a place.
| Option | Best for | Watch for |
|---|---|---|
| Standard gas tank | Houses with a gas line and a working flue | Venting must match the new unit |
| Standard electric tank | Houses without gas, simple install | Higher running cost in many homes |
| Hybrid heat pump tank | Low running cost where there is space and airflow | Needs clearance and a condensate drain |
| Tankless | Whole-house demand with a gas line or large circuit | Gas line, vent and panel work |
Before the old tank comes out
A few minutes of prep makes the day go faster.
- Clear a path to the heater and the area around it.
- Tell us where the water and gas shutoffs are, or ask us to find them.
- Plan for no hot water for several hours.
- Decide whether you want a different size or fuel, and tell us before we quote.
- Keep pets out of the work area.
Why same-day replacement is a real option
When a tank fails at night, hot water is the least of the worries. The leak can damage floors and walls in hours. We stop the water, drain the tank and tell you what a replacement involves right then, so the decision does not wait for a second visit.
If the right unit is in stock, we can often install it the same day. If it needs a special vent part or a larger size, we say so up front and give you a realistic window. Either way, the price is in writing before the old tank is touched.
If you are choosing between a like-for-like swap and a new type of heater, our water heater installation and tankless water heater pages explain the differences.
Codes and standards for a replacement
A new tank must meet the manufacturer's installation instructions and the IPC as adopted in South Carolina. Gas units follow ANSI Z21.10.1 and tankless gas units ANSI Z21.10.3, which is why venting and gas line size get checked before the old tank comes out.
What drives the replacement price
You see a written price before we begin.
Water heater replacement questions
Yes. Failed tanks are treated as emergencies on our 24/7 line. We send a plumber out, shut things down safely, and set a replacement when the right unit is available.
A standard tank swap usually takes a few hours once the unit is on site. Venting fixes, relocations or a switch from tank to tankless take longer.
Yes. Removal and disposal of the old unit is part of the job.
Often, yes, but it changes wiring, venting or gas sizing. We check those before quoting so there are no surprises.
Tank heaters commonly last around 10 to 15 years with maintenance. Easley's very soft water, measured at 6 mg/L hardness by Easley Combined Utilities in 2023, is gentle on tanks, though the anode rod still needs checking.
A replacement often leads to questions about the rest of the system, so see our installation page for new-construction and relocation work. We also serve Powdersville directly from Easley.
